peProductDetail__image--0
peProductDetail__image--1
peProductDetail__image--2
peProductDetail__image--3
peProductDetail__thumbnail--0
peProductDetail__thumbnail--1
peProductDetail__thumbnail--2
peProductDetail__thumbnail--3

PowerRadSok Bolt

MEPT - SV 16X16 - D8.00/35 - P36/1.60/3.50 v - RM2.54

Item number
K93326
Ampacity per pin (20°C) ~
10.00 A
Ampacity per pin (85°C) ~
6.00 A
Ampacity component (20°C) ~
360.00 A
Ampacity component (85°C) ~
216.00 A
Material
Brass
Surface
silver
Number of pins
36
Packaging unit
63 piece
Weight per piece
24.45 g
Customs tariff code / HS-Code
85369095
Country of origin
Deutschland
Total height
42.50 mm
Height above circuitboard
39.00 mm
Thread diameter
8.00 mm
Thread length
0.00 mm
Pedestal length
16.00 mm
Pedestal width
16.00 mm
Pin length
3.50 mm
Pin diagonal
1.60 mm
Pin assembly
Full plain
Grid dimension X
2.54 mm
Grid dimension Y
2.54 mm
Torque
0.0 Nm
Assembly method PCB
Pressfit Techn
Press-in force min.
1440 N
Press-in force max.
9000 N
Press-in speed min.
100 mm/min.
Press-in speed max.
250 mm/min.
Drilling diameter
1.60 mm
Final diameter HAL Surface
1.45 mm
Final diameter Chemical Surface
1.48 mm
datasheet
drawing / part dimensions
footprint pdf
footprint pdf
3D data
altium data
Footprint dxf
peProductDetail__image--0
PowerRadSok Bolt

Further product variants

Article nameArticle numberApplicationAssembly methodThread diameterThread lengthCurrent load capacity 20°CHeight over pcb
PowerRadSok Bolt
94287PluggingPressfit Techn8.000.00360.00 A42.50
PowerRadSok Bolt
93325PluggingPressfit Techn6.0034.50250.00 A42.00
PowerRadSok Bolt
94293PluggingPressfit Techn6.000.00250.00 A42.00
PowerRadSok Bolt
98415PluggingPressfit Techn5.700.00250.00 A29.60

Processing PowerRadsok Press-fit

PowerRadSok Press-fit Powerelements from Würth Elektronik ICS are pressed into the printed circuit board. Soldering is not required and there is no thermal stress. The manufacturing step fits easily into the process chain and is extremely cost effective.

Processing instructions

  • Use only suitable press-fit tools for press-fitting
  • For Powerelements with protruding lamella, the upper die must be recessed around the lamella. Do not apply pressure to the lamella.
  • A gap of 0.1 to 0.5 mm is recommended between the PCB and the pin base
Sketch for the board-to-board connection process by pressing in PowerRadSok elements

Further information

PCBs shall be designed in accordance with the latest edition of IPC A 600. In the case of massive press-fit technology, the PCBs must be designed in accordance with the Würth Elektronik ICS Press-fit Specification. Special attention should be paid to drill diameters and copper thickness.


Powerelements
All products

(LF) PowerOne

Ideal for versatile & customizable applications

More about the product group

(LF) PowerTwo

Ideal for through-bolt connectors, especially for high bolt-on forces

More about the product group

PowerLamella

Ideal for connections with Radsok connectors and high contact overlap of the lamella contacts

More about the product group

PowerRadSok

Ideal for connections with lamella connectors and high contact overlap of the lamella contacts

More about the product group

PowerFlex

Ideal for combinations of screw and Faston flat connectors in conjunction with low weight requirements

More about the product group

LF PowerPlus

Ideal for increased torque requirements (from 4Nm), lower weight requirements, and automated processing operations

More about the product group

LF PowerBasket

Ideal for multiple plugging cycles with low plugging forces, high position tolerance and low weight requirements

More about the product group

PowerCover

Ideal for the protection of Powerelements (rotation and contact protection)

More about the product group